ASG FINE GROUT is a cement-based grout suitable for grouting or pointing joints between Ceramic Floor & Wall Tiles, Vitrified Homogeneous Tiles, Porcelain Tiles, Mosaics, Terracotta, Marbles, Granites etc. Suitable for use at floor and wall, interior or exterior areas. The set grout is durable, compressible and good bonding strength.
White / Grey
20 KG± / 25KG±
During tiling allocate minimum joints of 2mm wide for wall tiling & 3mm wide for floor tiling.
Allow the adhesive bed to set 24 hours before grouting commences.
Ensure that joints are dry, clean or free of contaminants.
Apply grout into joints using a grout float/rubber squeegee, ensuring joints are fully compacted with grouting mortar.
Allow grout to set for minimum 24 hours.
HEALTH & SAFETY
ASG Fine Grout is not hazardous based on the major compound. However, we do recommend workers shall use safety equipment where necessary. In case of eye contact, immediately holy eyelids apart and flush eye(s) continuously with running water. Get medical aid immediately when necessary.
Note: The information about applications and suggestions for use is based on practical experience. As due to various site conditions and unable to control the applications, therefore no responsibility can be accepted by us for any loss and damage as this data sheet is for general guidance only.
Note: ASG reserve the rights to revise any data without prior notice.