ASG Gypsum Casting
  • Description

    ASG CASTING is a general casting application as well as for mould modelling. ASG Casting provides reproductions that are moderate hardness which makes it suitable for carving. ASG Casting is a wide variety of uses including the production of fibre reinforced cornice sections, tiles and ceiling roses.

  • Feature

    • Easy to use
    • Excellent Workability


  • To Manufacture special moulding


  • ASG CASTING packed in 25 Kg +/-
  • ASG CASTING must be stored in a dry place with pallet.
  • ASG CASTING unopened bags can be stored up to 12 months in a cool dry place.


ASG Casting_Application_Step1
Step 1

Add clear water into the tray.

ASG Casting_Application_Step2
Step 2

Pour ASG CASTING powder and water slowly and thoroughly.

ASG Casting_Application_Step3
Step 3

Leave powder soaked in the water for 1-2 minutes, then stir until the mixture becomes dense without lumps. Stir for 2-4 minutes until the mixture is dense enough.

ASG Casting_Application_Step4
Step 3

Pour into the mould while shaking it to prevent air bubbles. Flatten the mixture into the mould and leave it to dry. Remove from the mould when it is completely hardened or dry.


ASG Casting may cause eye, nose, throat or upper irritation. In case of eye contact, immediately hold eyelids apart and flush continuously with running water. If irritation occurs get medical aid immediately.

Note: The information about applications and suggestions for use is based on practical experience. As due to various site conditions and unable to control the applications, therefore no responsibility can be accepted by us for any loss and damaged as this data sheet is for general guidance only.

Note: ASG reserve the rights to revise any data without prior notice.